Motion Pro Fuel Injector Cleaner Kit For 06-17 Harley Touring Softail FLHX FXDF | JT's CYCLES

In the event of a damaged injector or a short circuit at the pulse output, the power indicator light of the fuel injector cleaner will flash. If you have any questions about this fuel injector test kit, please feel free to contact CMTOOL! 8 Pulse Modes (Mode 1 - Mode 8) Mode 0: Standby State, no output Mode 1: Single Pulse Low Power Mode: the fuel injector tester will send out a pulse with a pulse width of about 255 milliseconds. Mode 2: Short Pulse Low Power Mode: the fuel injector tester will send out 50 pulses with a pulse width of about 7 milliseconds. Mode 3: Long Pulse Low Power Mode: the fuel injector tester will send out 100 pulses, and the pulse width is about 3.5 milliseconds. Mode 4: Continuous Pulse Low Power Mode: the fuel injector tester will output pulses continuously, the pulse rate is about 50 pulses every 1450 milliseconds, and the pulse width is about 7 milliseconds. Mode 5: Single Pulse High Power Mode: the fuel injector tester will send out a pulse with a pulse width of about 255 milliseconds. Mode 8: Continuous Pulse High Power Mode: the fuel injector tester will output pulses continuously, the pulse rate is about 50 pulses every 1450 milliseconds, and the pulse width is about 7 milliseconds. NOTE: During the pulse output period, the MODE SET button is invalid, and the working mode can only be selected by pressing the PULSE button again to terminate the output.Wide Compatibility: 1. The fuel injector cleaning kit works with any fuel pressure tester. 2. This fuel injector test kit can be modified for relay testing or solenoid valve testing, and other modifications should be carried out under the guidance of professionals. Alligator Clip The clip with strong bite force is not easy to fall off, providing you with a better experience. Product Parameters Easy-To-Operate Fuel Injector Tester Pulse Tool Turn off the car's engine. Connect the red clip of the fuel injector cleaner tool to the positive terminal of the 12V car battery, and connect the black clip to the negative terminal of the battery. Press the MODE SET key to select the desired pulse signal output mode, and the screen will display the currently selected mode. After selecting the desired pulse signal output mode, press the PULSE key, the fuel injection cleaner will output pulses to the injector to be tested, and the signal indicator will light up when the pulses are output. If you want to change the pulse mode, you need to disconnect the battery of the fuel injector tester and then reconnect it.Packing List NOTE 1. Wear approved safety goggles. 2. Only use this fuel injector cleaner in a ventilated place, do not inhale exhaust gas and steam from vehicles. 3. Before using this fuel injector cleaner, the car engine must be turned off. 4. Do not smoke or light a fire near the car. 5. Do not splash the fuel of the car on the hot engine parts. 6. Do not get close to any rotating (or moving) parts of the car, and do not touch any heat-generating parts of the car. 7. Do not short-circuit the positive and negative poles of the car battery. 8. Do not touch any auto parts with dangerous voltage. This tester kit is the most powerful and adapter-rich injector tester kit on the market, which can help you accurately detect the performance of the injector, diagnose faults, and ensure the normal operation of the engine. 2.【8 Pulse Modes & LCD Display & Indicator Light】The fuel injector tester has 8 pulse modes, consisting of 4 pulse signal output modes and 2 output voltage levels: short/medium/long/continuous pulse mode + high/low (12V/5V) power drive mode. The LCD will clearly display the pulse mode you selected, and the two indicator lights will flash quickly to indicate the pulse output status. 3.【Test Two Injectors Simultaneously】This fuel injector cleaner kit has a special 4 pulse output terminals (two pairs of test leads) that can test two fuel injectors at the same time. The test lead length is 47 cm/18.5 inches and the power cord is 85 cm/33.5 inches, which improves the convenience and efficiency of testing. Both the test leads and the power cord are made of high-quality silicone, which has better high and low temperature resistance. 4.【Reverse Polarity Protection & Short Circuit Protection】When the battery clamp is incorrectly connected to the positive and negative poles of the power supply, the protection circuit inside the tester can prevent the current from flowing in the wrong direction, thereby effectively protecting the safety of the tester and the user. Note: (1) It can be used with any fuel pressure tester. (3) Only suitable for gasoline engines, not for diesel engines. 6.【Packing List & 3 Years Warranty】The fuel injector tester and cleaner kit includes a fuel injector tester, a pair of battery clamps, 6 cleaning adapters, an English manual and a portable carrying bag. We provide a 36-month free warranty for this fuel injector tester cleaner tool kit, if there are any quality problems during use, please feel free to contact us, we will send you a new set.