Rikon Combination Belt & Disc Sander - Lee Valley Tools

disc sander The WORKPRO Belt Disc Sander can easily sand and smooth the splinters on your workpieces. (RPM) of disc speed, users could sand pieces more professionally and efficiently. Note: pull the belt tension lever toward you to release the belt tension. Turning the belt sander vertically meets your different sanding needs. Note: using the hex key provided, loosen the positioning bolt by turning the bolt counterclockwise. Sanding small end surfaces using the miter gauge, improving sanding work efficiency. Installing/replacing sanding disc 1. Using the hes key provided, loosen the positioning bolt. 2. Move the sanding belt into the vertical position. 3. Lock the sanding belt by tightening the positioning bolt. 4. Pull the belt tension lever toward you to release the belt tension. 5. Place the sanding belt over the drive roller and idler roller with the directional arrows running counterclockwise. Be sure the sanding belt is centered on both drums. 6. Push the belt tension lever back into place to apply the belt tension. NOTE: 1. Please follow the safety instructions in the manual. 2. If any parts are damaged or missing, please contact our online service. 2 in 1 sander: This sanding machine includes a 4 x 36-inch belt sander and a 6-inch sanding disc with an extra 3*belt and 3*disc, which meets your different applications, like wood. Woodworking will get a lot easier with the WORKPRO Belt/Disc Sander Using the hex key, loosen the positioning bolt and then adjust the position. Good helper for woodworking and all your DIY needs Multi-Angle Sanding: The worktable can be tilted from 0°-45° for bevel sanding. A miter gauge increases accuracy, which is recommended for sanding small end surfaces on the sanding disc Powerful Motor: This sander is powerful with a 4.3 Amps 1/2 HP motor, providing 1900 SFM of belt speed and 3600 r/min. (RPM) of disc speed, which is more professional than other sanding machines